Litokol Starlike EVO is a two-component epoxy grout, here in Bianco assoluto (100) colour. The coloured paste and hardener are together in one bucket. You can grout ceramics, porcelain stoneware and mosaic with it, and the same product can also be used as tile adhesive.
Colour & Atmosphere
Bianco assoluto (100) is pure white — no cream, no grey undertones. With high-gloss white wall tiles, the grout almost disappears into the surface; with matte white, just enough line remains to see the pattern.
Product & Application
Starlike EVO is intended for joints from 1 to 15 mm, on floors and walls, indoors and outdoors. The cured grout is non-absorbent and stain-resistant. The colour comes from sintered quartz microspheres that are coloured on the surface, meaning no pigment is left on the tile and cleaning is easier.
- Ceramic tiles, porcelain stoneware, and single or double-fired tiles
- Ceramic and glass mosaics
- Large format tiles and thin laminated stoneware slabs
- Marble, granite, natural stone, and reconstituted stone
- Terracotta and clinker
- Wet rooms, showers, swimming pools, fountains, spas, and hammams
- Terraces, balconies, facades, and floors with heavy traffic
For natural stone, polished porcelain stoneware, and porous materials, the manufacturer recommends always making a test grout first. This helps determine whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous articles such as concrete curb stones are outside the scope of application.
Substrate & Compatibility
When used as a grout, apply Starlike EVO to joints that are clean, dust-free, and open across the full tile thickness. First, check that the tile adhesive is completely dry and cured. If using as an adhesive, the substrate must be clean, load-bearing, crack-free, and free from rising damp.
- Screeds and levelling compounds
- Concrete and plasterwork
- Underfloor heating
- Waterproofing layers, including Coverflex and Aquamaster EVO
- Metal substrates, for example in prefabricated bathrooms
- Wooden kitchen countertops with tiles or mosaic
Butt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout, but rather a sealant from the Pixel 3D range.
Application
Cut open the hardener bag and completely empty it into the bucket containing part A; roll up the bag to ensure nothing is left behind. Mix with a slow-speed mixer (approx. 300 rpm) until a creamy, lump-free mass is achieved, then scrape the sides and bottom of the bucket. Manual mixing is not recommended.
- Apply between +10 °C and +30 °C, optimally between +18 °C and +23 °C
- Approximately 60 minutes working time in the bucket at +23 °C
- Apply with a rubber grout float, diagonally to the joint direction
- Clean while the product is fresh: first white felt, then a damp sponge
- Walkable after 24 hours, fully load-bearing after 5 days, swimming pools after 7 days
Remove haze and residue from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After this, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh grout — wait 48 to 72 hours before placing breathable material over it.
Key Features
- Grout and bonds with the same product, joints from 1 to 15 mm
- Non-absorbent and stain-resistant
- Resistant to temperatures from -20 °C to +100 °C
- Contains no cement, preventing efflorescence
- Colour-stable: the quartz microspheres are coloured on the surface
- The hardener is classified only as irritating, not corrosive
Technical Specifications
| Property |
Value |
| Type |
Two-component epoxy grout and adhesive |
| Class |
RG according to EN 13888, R2T according to EN 12004 |
| Joint width |
1 to 15 mm |
| Mixing ratio |
93.7 parts A to 6.3 parts B, pre-dosed |
| Specific gravity of mixture |
1.55 kg/dm³ |
| Working time |
Approximately 60 minutes at +23 °C |
| Application temperature |
+10 °C to +30 °C |
| Walkable |
After 24 hours |
| Load-bearing |
After 5 days, swimming pools after 7 days |
| Service temperature |
-20 °C to +100 °C |
| Shelf life |
24 months in unopened packaging, store frost-free |
Frequently Asked Questions
Can I also use Starlike EVO as tile adhesive? Yes. Spread it with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after about 24 hours.
How long do I have after mixing? Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so spread the product quickly over the floor instead of letting it sit in the bucket.
What if I remove residues too late? After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.
Can I clean the grouted floor with bleach? No. The manufacturer advises against bleach: if insufficiently diluted or rinsed, the grout may yellow, which is especially noticeable on light colours. Also, do not use aggressive cleaners for the first five days.
